Teck90 Cable
TECK 90 cable is a type of electrical cable commonly used in industrial and commercial applications.
It is designed for heavy-duty installations where durability and resistance to various environmental factors are essential.
Construction
- Conductor:
- Round concentric lay class “B”
- stranded copper/ Aluminum compact class “B” strand
- Insulation:
- Cross-linked Polyethylene (XLPE)
- Bonding Conductor (Ground):
- Bare stranded class “B” copper
- conductor/ Bare stranded bare aluminum
- (ACM) conductor
- Inner Jacket:
- Polyvinyl Chloride (PVC), black
- Armour:
- Aluminum interlocked armour
- Outer Jacket:
- Low acid gas, flame-retardant, moisture and
- sunlight resistant Polyvinyl Chloride (PVC), black
Application
- For concealed wiring in dry or wet locations
- For exposed wiring in dry or wet locations
- For exposed and wiring in dry, locations were subjected to corrosive action if suitable for corrosive conditions encountered
- For exposed wiring where subjected to the weather
- For use in ventilated, Non-ventilated, and ladder-type cable trays in dry or wet locations
- For direct earth burial (with protection as required by inspection authority)
- For service entrances above or below ground
Feature
The cable consists of multiple conductors, typically made of copper or aluminum, which carry the electrical current.
These conductors are insulated with a layer of material, such as cross-linked polyethylene (XLPE) or polyvinyl chloride (PVC), to prevent electrical leakage and ensure safe transmission.
The number of conductors can vary depending on the specific application and requirements.
- Rated at 90°C wet or dry
- Excellent crush resistance
- Provides long service life
- Cost effective alternative to installations in conduit
- Meets cold bend and impact tests at (-40°C)